If you have recently installed or updated Windows 10, you may be experiencing Wi-Fi issues. We are here to help! Wireless communication problems are very worrying because they can cause so many things.
For example, you may not have a driver, or you may not have properly configured your computer. Have you checked the wireless switch (if you have one)? Then again, many things can go wrong.
This article will solve the Windows 10 Wi-Fi problem by checking the most common issues. Let’s get started.
1. Limited Connection
Most Windows 10 users get limited communication, and it is challenging to find out what causes it. That may start with outdated drivers, improper Ethernet cable, your network adapter, or the antivirus software you are using. Unfortunately, the one thing you can do to solve the Wi-Fi problem is to take the best one step at a time.
We will try the most common solutions, but if they do not work, try some of the other suggestions mentioned in this article.
2. Launch The Networking Troubleshooter
The first thing you should try to build within Windows 10 Network Debugger. In most cases, however, Wi-Fi solves its problems.
The most straightforward way to access this resource is to type troubleshooter in the search and select Find and fix network problems.
Let Windows diagnose network problems and apply the suggested fixes. If this does not help, you should also resolve the network adapter. Type problem-solving network adapters in the search box and follow the same steps.
3. Reset TCP
If the troubleshooter detects that Wi-Fi does not have a valid IP configuration, you must reset TCP / IP. It is a widespread solution, although older drivers can also cause this.
To reset TCP, type the command prompt in the Windows Search box. Before launching Prompt, make sure to right-click and select the Run option as controller. If not, some commands may not work.
Next, type the following instructions separately by pressing the Enter key one after the other:
- netsh Winsock reset
- ipconfig / release
- ipconfig / upgrade
- netsh int IP reset
- ipconfig / flushdns
Restart your computer and check that your wireless connection is now active. If it does not work, keep resolving the issue via Wi-Fi using our tips below.
4. Check Your Antivirus
Antivirus software is essential, but it can sometimes cause conflicts with a limited internet connection message. Note that Windows Defender, and Windows 10 antivirus, should not cause any problems with your wireless connection.
Many users report that third-party antivirus software may block Wi-Fi. So if this is what you are trying to get, try disabling your antivirus. Then, if Bitdefender, Avast, AVG, or similar antivirus is the cause, remove it.
5. The Wi-Fi Icon is Missing
In some cases, the wireless is off. For example, you can’t find the Wi-Fi icon, and if you dig deep into your network settings, you won’t find the Wireless section.
Many users report this problem, especially after cleaning the Windows 10 install. Missing or outdated Wi-Fi drivers often cause this. Also, if you have purchased it, the Wi-Fi module may cause it, so make sure it is properly connected.
That said, there are a few solutions you can try.
6. Check For Updates
Start watching your drivers, especially if you have just installed Windows 10. Many users install operating systems on their devices without connecting to the Internet. As a result, Windows cannot automatically install any drivers during the installation process, so some will be absent.
Go to the Settings Panel And Select Update & Security.
In your case, you should have drivers other than those seen in this photo. Hopefully, one of them is a Wi-Fi driver. Be sure to connect to the Internet via a network cable or connection to your smartphone and download the drivers.
7. Reinstall Wi-Fi Driver
The Wi-Fi Driver is damaged in some cases, and updating it will do nothing. So what do you need to reinstall?
To do this, you will need to uninstall the Driver first and check for updates using the previous solution or download from the manufacturer’s website.
- Go to Device Manager and check your Wi-Fi Driver under Network adapter to remove an existing driver.
- Select your wireless Driver, double-click to open the Features panel, and navigate Driver. You will find the Driver Details button, which will tell you everything you need to know about the Driver.
- To download and install the Driver on the Wi-Fi card manufacturer’s website, you need this information.
- Now, go back to the inside Device Manager driver, right-click on it, and select the Uninstall Device option. That will remove the Driver from your computer to install it properly.
Once the Driver has removed that, you can return to the Check Updates panel mentioned above or the manufacturer’s website. Either way, install drivers and restart your computer.
8. Wi-Fi Disconnected After Sleep Mode
Is your wireless connection functioning well until your computer enters sleep or hibernate mode?
If so, you might be encountering a troublesome power-saving feature. That prevents your Wi-Fi connection from reactivating after your computer wakes up.
- To address this issue, type “power settings” in the Windows search bar and attempt to resolve it.
- Choose “Set Power Plan,” which will open your computer’s current power system settings.
- Afterward, click on “Change advanced power settings.”
Please scroll down to Wireless Adapter Settings, expand it, and convert Power Saving Mode into High Performance.
Some tips for Troubleshooting via Wi-Fi
There are a few things you can try at this time if none of those, as mentioned above, are tips to fix your Wi-Fi connection.
1. Configure Your Network Adapter
Are you sure your network adapter is configured correctly?
- Go to Network and Sharing Center in settings
- Click Change Adapter Settings to open the Network Network page.
- Right-click on your Wi-Fi adapter and select Properties.
It would help if you got Internet Protocol Version 4 (TCP / IPv4). Please select it and click the Properties button.
Do you find the IP address and the selected DNS server address automatically? If not, enable them.
2. Reset your Router
Route configuration can sometimes interfere with your computer’s Wi-Fi settings. This problem may arise later or when you play with the router settings. Either way, you should try to reset it to its default settings.
There are several ways to reset your router. Usually, you can press a small, hidden reset button or go to the router setup page and do it from there.
3. Check the Wi-Fi Switch
Some laptops still come with a switch on or off Wi-Fi. If this is your case, be sure to check that it is ON.
4. Device Disruption
Some devices may interfere with the Wi-Fi signal. Check the specifications for your microwave oven, phone, speakers, and other electrical appliances. If they match precisely the frequency of your router, you should try to turn it off.
If the home device is causing your problem, the solution is to remove the router from it.
Storage – Update or Reset BIOS
If you have tried all the steps to solve the Wi-Fi problems above, you should try this solution.
Updating the BIOS used to be something that most people avoided at all costs. But today, it is much easier to do with modern motherboards. Just make sure you read the instructions through your motherboard and back up your data.
Alternatively, you can also try resetting the BIOS in its default settings.
As mentioned at the outset of this article, many things can make your Wi-Fi go awry. However, one of our solutions has worked for you. If not, you may have a hardware problem, and you should check the wireless module. However, let us know how to fix your Wi-Fi in the comments!